Marine Coatings

We have painting, sealing and filling systems for GRP (fibreglass), timber, aluminium, steel and ferro-cement. For above and below water line. Most of the following products also have architectural and industrial applications.

marine paint

PRIMERS/SEALERS/UNDERCOATS

FORMINEX TIMBER PRESERVER & PRIMER

High epoxy resin content timber preserver. Contains biocides to protect timber from black spot and other fungi. An excellent moisture block-out sealer for all timbers. 

Click here for product data >>

SPESCOAT DEEPTREAT

is an oil-based, clear, water-repellent preservative for uncoated timber. It is suitable as a treatment prior to painting or staining. Deep-treat reduces the excessive intake and release of moisture, therefore minimising warping and splitting of timber. 

Click here for product data >>

FORMINEX SANDING PRIMER

A high-build epoxy primer and undercoat for above and below the water. Easy sanding for up to three weeks. Superior filling properties. Suitable under all top-coats. 

Click here for product data >>

FORMINEX VINYL PRIMER

Single pack solvent based primer. Excellent bleed stopping properties and superior adhesion to substrates including: wood, steel, masonry and fibreglass. May be used on surfaces that will remain immersed in water. May be used as a primer under most single-pack paints including enamel, acrylic, chlorinated rubber and vinyl coatings such as antifouling. May also be used as a self priming-finishing coat when 2-3 coats are applied. 

Click here for product data >>

FORMINEX RED METAL PRIMER

A two pack polyurethane metal primer, which combines excellent adhesion with great impermeability and incorporates corrosion resistant, pigments.

Click here for product data >>

FORMINEX FORMAGUARD E2 ALUMINIUM PRIMER

A two pack epoxy, anti corrosive primer and etch for all ferrous and aluminium surfaces. Excellent adhesion and chemical resistance. 

Click here for product data >>

FORMINEX CERAMAGLASS

is a single pack, clear, adhesion promoting, fast drying primer. Used on glass, ceramic-tiles, porcelain, terrazzo, some plastics, laminates, and vitreous enamel. 

Click here for product data >>

FORMINEX EPOXY UNDERCOAT

Single pack, epoxy ester primer and undercoat. Has excellent anticorrosive properties when applied to metal. Dries to a smooth matt finish. Excellent base for overcoating with Epoxy Enamel or most 1-pack finishes. Suitable for metal, wood, fibreglass and concrete.

Click here for product data >>

FORMINEX UNIVERSAL UNDERCOAT 

High opacity two-pack urethane undercoat for use under FORMINEX SUPER GLOSS. Also acts as a barrier coat over other paints to ensure there is no adverse reaction when 2-PACKS are applied.

Click here for product data >>